-
Our ZBROZ HD Pro Lower Radius Rods broke the rules over a decade ago in ground clearance design and proven durability. We have now taken it the next level and built them beefer and stronger than ever to exceed the limits of your RZR Turbo S. With inches of ground clearance all the way to the hub while protecting your axles you won’t have to worry about broken arms again. -
MTM HANDLESBARS
- DESIGNED TO ENHANCE PERFORMANCE AND INCREASE EASE OF CONTROL WHEN RIDING STEEP AND TECHNICALLY CHALLENGING TERRAIN.
- THE RISE OF THE BARS HAS BEEN LESSENED TO A 2-4 INCH RISE OFFERING MORE LEVERAGE.
- AVAILIABLE IN BOTH 45 DEGREE ENDS OR STOCK OEM HOOKS "SH".
- THEY COME BOLT-ON AND PLUG-IN READY INSTALLED WITH POLARIS OEM HANDWARMERS AND GRIPS
-
Our ZBROZ Middle Series® Lower Radius Rods were designed and built for the competitive racer, extreme trail rider, and avid rock crawler that require strength & durability. Complete your rear look with our unique I-beam billet design. -
Our ZBROZ Intense Series® Lower Radius Rods were designed and built for the competitive racer, extreme trail rider, and avid rock crawler that require high strength durability. Complete your rear look with our unique I-beam billet design, built for strength and durability. -
DO IT YOURSELF!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ZBROZ Racing is NOT responsible for any damage or failure resulting from improper installation. Download Pdf InstructionsSAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components. -
for All 2015-22 900 RZR/S/XC/4, 2014-22 1000 XP RZR/S/4, 2016-21 RZR Turbo, 2016-22 General/4, and 2018-22 RS1 -
Our ZBROZ Polaris RMK Billet Spindles are machined from 6061 Aluminum to make them lighter and stronger than OEM. Built to improve your ride and solve the week points from factory parts -
Our ZBROZ Polaris RMK Traverse Billet Spindles are designed to be 3\4” shorter than OEM stock spindles and built to improve ride stability and side hilling vs. the factory setup. Machined from 6061 Aluminum to make them lighter and stronger than OEM and built to improve week points from factory parts. -
Just like the Macer jacket, the Macer Monosuit has more of a slimmer look and athletic fit. Perfect both as a Monosuit for sledding and skiing/snowboarding. Our Macer Monosuit has a slimmer, more athletic fit than our other Monosuits which makes it a favorite among skiiers/snowboarders. The Macer Monosuit has plenty of pockets, Kevlar reinforced areas and is 100% wind & waterproof. So get ready for winter adventures in our Macer Monosuit. -
Our Polaris RMK Billet Upper A-Arm Kits were built for the serious rider that wants the clean machined look that billet offers! They are lighter than OEM and built to withstand the bumps and bruises that lay waiting under the snow. -
Our Arctic Cat Billet Upper/Chromoly Lower A-Arm Kits were built for the serious rider that wants the clean machined look that billet offers! Our Chromoly Lower A-Arms provide maximum clearance, durability and reliability that you need for serious backcountry, tree boondocking, cliff dropping and air grabbing action. -
VAILSLIDE ONE-PIECEEngineered from the ground up for the modern crossover rider, the Vailslide women’s one-piece is at home carving backcountry powder and flying down groomed trails. With legendary KLIM one-piece functionality, lightweight insulation to cut the chill and adjustable ventilation, the Vailslide is ready to adapt to a wide range of conditions right out of the box. -
Our ZBROZ Intense Series® Lower Radius Rods were designed and built for the competitive racer, extreme trail rider, and avid rock crawler that require high clearance, strength & durability. Complete your rear look with our unique I-beam billet design. -
Our ZBROZ Intense Series® Lower Radius Rods were designed and built for the competitive racer, extreme trail rider, and avid rock crawler that require high clearance, strength & durability. Complete your rear look with our unique I-beam billet design. Colors:
- Raw - K45-0658-0
- Black - K45-0658-01
- Polaris RZR XP 1000 (2014-2022)
- Polaris RZR XP Turbo (2014-2022)
- Polaris RZR XP 4 1000 (2014-2022)
- Polaris RZR XP 4 Turbo (2014-2022)
- Polaris RZR RS1 (2018-2021)
-
Factory tender springs just don’t cut it and most of them are already sagging out on the showroom floor. Adding the ZBROZ Tender Spring Kit is one way to dramatically improve your Pro XP’s ride quality while at the same time increasing lift by up 1” - 2”. -
Factory tender springs just don’t cut it and most of them are already sagging out on the showroom floor. Adding the ZBROZ Tender Spring Kit is one way to dramatically improve your Pro XP’s ride quality while at the same time increasing lift by up 1” - 2”.
-
Factory tender springs just don’t cut it and most of them are already sagging out on the showroom floor. Adding the ZBROZ Tender Spring Kit is one way to dramatically improve your Pro XP’s ride quality while at the same time increasing lift by up 1” - 2”. -
DO IT YOURSELF!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ZBROZ Racing is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions -
for Polaris 2008-14 Polaris 800 RZR -
This performance slip-on muffler for the Polaris RZR 570 is designed for maximum airflow without increasing sound level output. It provides a 32% increase in airflow over the stock silencer. This results in a substantial performance improvement, showing better throttle response as well as top-end horsepower. Will not fit 2012 570 RZR. Fits 2013-17 models. -
-
TOBE Vivid V2 Mono Suit CFBlack S
The Vivid™ V2 mono suit is built to be lightweight while still providing the technical reliability you demand in the harshest conditions. The Vivid™ V2 has a 45,000mm Sympatex® membrane making it 100% windproof, 100% waterproof and optimally breathable. All zippers are fully waterproof with YKK Aquaguard® and all seams are double stitched. Laser cut neoprene wrist gaters, fully functioning cell phone pocket and removable powder skirt make the Vivid™ V2 monosuit second to none. The Vivid Collection utilizes an ultra-durable and technical Cordura® shell so you’re warm, safe dry and stoked.
-
-
ZBROZ is excited to announce their all-new Tender Spring Kits for the 2014-2022 Polaris RZR XP 4 1000/Turbo Walker Evans shocks. Let’s face it, factory tender springs just don’t cut it and most of them are already sagged out on the showroom floor. Adding the ZBROZ Tender Spring Kit is one way to dramatically improve your RZR’s ride quality while at the same time increasing lift by up 1” - 2”. Vehicle Applications:- Polaris RZR XP 4 1000 (2014-2022)
- Polaris RZR XP 4 Turbo (2014-2022)
-
ZBROZ is excited to announce their all-new Tender Spring Kits for the 2014-2022 Polaris RZR XP 1000/XP 1000 4 Walker Evans shocks. Let’s face it, factory tender springs just don’t cut it and most of them are already sagged out on the showroom floor. Adding the ZBROZ Tender Spring Kit is one way to dramatically improve your RZR’s ride quality while at the same time increasing lift by up 1” - 2”. Vehicle Applications:
- Polaris RZR XP 1000 (2014-2022)
- Polaris RZR XP Turbo (2014-2022)
-
ZBROZ Aggressive X0 Exit Center Shock was built for the more aggressive rider with extra weight provides a much needed upgrade from your OEM stock center shock. The X0 Series Shock bolts on in minutes and gives you more control, comfort and stability for your ride. The coil-over spring setup will deliver that smooth plush ride on those whooped out trails yet aggressive enough to handle larger hits, jumps and drops. -
ZBROZ X0 Exit Center Shock provides a much needed upgrade from your OEM stock center shock. The X0 Series Shock bolts on in minutes and gives you more control, comfort and stability for your ride. The coil-over spring setup will deliver that smooth plush ride on those whooped out trails yet aggressive enough to handle larger hits, jumps and drops.
-
ZBROZ Aggressive X0 Exit Center Shock was built for the more aggressive rider with extra weight provides a much needed upgrade from your OEM stock center shock. The X0 Series Shock bolts on in minutes and gives you more control, comfort and stability for your ride. The coil-over spring setup will deliver that smooth plush ride on those whooped out trails yet aggressive enough to handle larger hits, jumps and drops.
-
ZBROZ X0 Exit Center Shock provides a much needed upgrade from your OEM stock center shock. The X0 Series Shock bolts on in minutes and gives you more control, comfort and stability for your ride. The coil-over spring setup will deliver that smooth plush ride on those whooped out trails yet aggressive enough to handle larger hits, jumps and drops.
-
ZBROZ Aggressive X0 Exit Center Shock was built for the more aggressive rider with extra weight provides a much needed upgrade from your OEM stock center shock. The X0 Series Shock bolts on in minutes and gives you more control, comfort and stability for your ride. The coil-over spring setup will deliver that smooth plush ride on those whooped out trails yet aggressive enough to handle larger hits, jumps and drops.
-
ZBROZ X0 Exit Center Shock provides a much needed upgrade from your OEM stock center shock. The X0 Series Shock bolts on in minutes and gives you more control, comfort and stability for your ride. The coil-over spring setup will deliver that smooth plush ride on those whooped out trails yet aggressive enough to handle larger hits, jumps and drops.
-
ZBROZ X0 Exit Center Shock provides a much needed upgrade from your OEM stock center shock. The X0 Series Shock bolts on in minutes and gives you more control, comfort and stability for your ride. The coil-over spring setup will deliver that smooth plush ride on those whooped out trails yet aggressive enough to handle larger hits, jumps and drops.
