ZBROZ X0 Exit Center Shock provides a much needed upgrade from your OEM stock center shock. The X0 Series Shock bolts on in minutes and gives you more control, comfort and stability for your ride. The coil-over spring setup will deliver that smooth plush ride on those whooped out trails yet aggressive enough to handle larger hits, jumps and drops.
SKI-DOO GEN 4 X0 EXIT CENTER SHOCK AGGRESSIVE
- 1.5″ Shock Body I.D.
- 1.5″ Reservoir Body I.D.
- Hard Anodized for Extreme Wear Resistance on all surfaces
- Billet 7075 High Flow Valving Piston
- Billet 6061 Valving Assembly
- Flow Friction Wear Band
- 5/8″ Micro Polished Chrome Shaft
- Delrin Crossover Spring Divider
- High Performance Closed Cellular Foam Bump Stop
- Advanced Seal Head Technology
- Black High Tensile Wire Springs
- Billet 6061 Eyelets
- MADE IN THE USA
All EXIT SHOCKS are serviceable for years of reliable use. For service contact your local Zbroz Racing Dealer or send your shocks to us for full service. Zbroz Racing recommends that you service EXIT SHOCKS every 1,500 miles or every 24 months. All EXIT SHOCKS are custom-built, valved, and tuned to applications. Please allow a 2-4 week build time.
Shipping: Zbroz Racing products are fulfilled per order on a first come first serve basis. We strive to fulfil all orders within 48 hours. Should a backorder condition result you will be notified and we will fulfil your order as quickly as possible. If placing an order for a Zbroz Racing Exit Shock product. Please know they are custom built to order and depending upon demand can take 4 weeks or longer to supply. Zbroz Racing products are built to last and exceed your expectations with quality, performance and durability in mind. Should you have any questions or concerns please contact us at firstname.lastname@example.org. Thanks again for your order and we look forward serving your off-road needs
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.